Laser Light Rust Remover: Technical Specifications

Wavelength selection is critical for effective rust removal. Klear Laser systems use 1064nm near-infrared light. This wavelength is highly absorbed by iron oxide while reflecting off steel substrates. It ensures rust is vaporized without damaging the base material.

Adjustable pulse energy allows precise control over rust removal. Typical range is 50-200 millijoules per pulse. Lower settings handle thin rust layers on sensitive surfaces. Higher settings efficiently tackle thick corrosion on robust materials.

Proper cooling maintains laser stability during prolonged operation. Air-cooled designs support portable use cases. Water-cooled units handle continuous industrial production. Both prevent overheating and ensure consistent performance.

主な特徴と利点

Klear Laser’s “laser-light” rust remover is built around a Q-switched JPT MOPA fiber engine that lets us stretch pulse width from 6–500 ns.

That range is the sweet spot for iron-oxide ablation: short enough to shatter rust without heating the steel, long enough to keep cycle times under 10 s/ft².

We pair the source with a KLEAR-SCAN triple-element lens head machined from 6082-T6 aluminium and capped with sapphire glass.

The head holds 30 mm of dynamically adjustable focus, so one pass cleans everything from 0.2 mm laser-scale to 0.8 mm pitted corrosion while the substrate stays below 80 °C.

Inside the head a 20 kHz galvanometer keeps the spot overlap at 28 %; this homogenises the fluence and prevents the tiger-stripe pattern common on cheaper cleaners.

Because the scanner is sealed to IP54 and the source is fan-less, the whole unit runs 24/7 in a foundry without maintenance beyond a quarterly lens wipe.

産業用途

Laser light rust removers, specifically the pulsed fiber laser cleaning systems engineered by Klear Laser, utilize high-intensity light beams to vaporize oxidation through sublimation. This non-contact process effectively replaces abrasive sandblasting and hazardous chemical pickling, which are notorious for generating secondary waste. By precisely controlling the pulse width and frequency, our machines deliver high peak power that blasts away contaminants while ensuring absolute substrate safety.

In the automotive manufacturing sector, these systems are critical for preparing metal surfaces before welding or bonding. Manufacturers utilize laser cleaning to remove oil, grease, and surface rust from chassis components and transmission parts to guarantee zero-defect welds. The precision of the laser ensures that the dimensional tolerances of critical engine components remain unaltered during the cleaning process.

The aerospace industry demands the highest standards of material integrity, making non-destructive laser cleaning the preferred method for maintenance and overhaul. Technicians use our pulsed laser technology to strip paint from delicate aluminum alloys and composite materials without inducing thermal stress or micro-cracking. This capability is vital for preparing turbine blades and fuselage sections for non-destructive testing (NDT) without damaging the high-value base material.

Marine applications present unique challenges due to aggressive saltwater corrosion and bio-fouling on steel structures. Klear Laser systems are deployed in shipyards to remove heavy rust layers and salt deposits from hulls, propellers, and engine rooms. The high peak power of the laser source allows for rapid removal of thick oxidation layers that traditional solvents often fail to penetrate.

Substrate safety is the defining advantage of using pulsed laser technology over continuous wave (CW) lasers for cleaning applications. A pulsed laser emits light in extremely short durations, often in the nanosecond range, which allows the contaminant to absorb energy and vaporize before heat can transfer to the base metal. This self-terminating effect ensures that once the rust is removed, the laser reflects off the clean metal surface, leaving the component strictly intact and ready for immediate use.

クリアレーザーを選ぶ理由

Klear Laser delivers unmatched operational security for industrial customers through our global support infrastructure. Our technical team provides 24/7 remote diagnostics and on-site assistance with field engineers typically onsite within 24 hours globally. This rapid response minimizes production downtime for critical laser cleaning and welding operations.

We back all industrial systems with a comprehensive 24-month warranty covering core components like laser sources and motion systems. This extended coverage significantly exceeds the industry standard one-year warranty, reflecting our confidence in engineering quality. The warranty explicitly includes protection against substrate damage during certified rust removal processes when using approved parameters.

Global spare parts availability ensures minimal machine downtime across all product lines. Strategically located distribution hubs in the EU, North America, and Asia maintain critical inventory of OEM components like pulsed fiber sources and galvanometer heads. Genuine parts guarantee system performance integrity and maintain safety certifications for rigorous industrial use.

This integrated approach directly supports our mission to replace unreliable industrial processes with dependable laser technology. Customers achieve lower total cost of ownership through reduced downtime and extended equipment lifespan. Klear Laser’s commitment ensures your rust removal or welding system operates at peak efficiency throughout its service life.