Automatic Laser Welding Machine: Case Study

A major automotive supplier struggled with manual TIG welding for exhaust components. Each part required 12 minutes of labor and suffered from 18% scrap rates due to warping and inconsistent seams. Labor costs reached $45 per unit, making production unsustainable.

Klear Laser installed an automatic system with a JPT 2000W fiber source and precision wobble welding heads. Real-time parameter adjustments ensured flawless 3mm penetration on 2mm steel without burn-through. Complex geometries were welded flawlessly without fixture changes.

Cycle times dropped by 85% to 1.8 minutes per part. Scrap rates fell to 0.3%, and energy use decreased by 57%. The system paid for itself in four months through reduced rework and material savings.

主な特徴と利点

Klear Laser’s automatic laser welding cell pairs a JPT single-mode 3-in-1 laser source—rated for >100,000 h MTBF—with a Raycus Q-Beam wobble welding head that delivers ±3 mm beam oscillation at 4 kHz. The combination gives you 4 mm extra penetration on aluminum and stainless while eliminating the under-cut and porosity you fight with fixed-optic heads. A built-in encoder closes the loop between the six-axis robot and the laser, so every joint autogenously tracks groove geometry in real time without operator touch-ups.

Because the head carries a programmable collimator and dual-temperature chill loop, you can jump from 0.8 mm battery tab welds at 200 W to 8 mm structural steel at 3 kW without changing nozzles or purge fixtures. Auto-focus keeps the spot size within ±0.05 mm at 150 mm working distance, so even 45° fillet welds on 3-D frames hold ±0.02 mm reinforcement tolerance. The result is Class-A seam cosmetics that pass AWS D17.1 aerospace bend tests at twice the travel speed of MAG or TIG lines.

Our automatic cell ships with a swing-open cabinet, EtherCAT safety PLC, and free recipe library calibrated for copper, zinc-coated steel, and titanium. You load a part barcode, the robot loads the weld map, and the laser ramps from idle to full power in <5 ms—no arc start scratch, no filler spatter, no post-grind. That is why Tier-1 EV, heat-exchanger, and furniture makers switch to Klear Laser when they need zero-defect throughput today and a clear path to 6 kW tomorrow.

産業用途

Automatic laser welding machines are revolutionizing heavy industry by replacing manual TIG and MIG processes with high-speed precision and superior energy efficiency. Utilizing top-tier fiber laser power sources from JPT or Raycus, these systems deliver the consistent energy density required for deep penetration welds in automated production lines. The integration of advanced wobble welding heads allows for adjustable beam patterns, ensuring excellent gap bridging capabilities that standard fixed beams cannot achieve.

In the automotive sector, manufacturers utilize these machines extensively for body-in-white assembly and electric vehicle battery pack fabrication. The focused heat input minimizes the heat-affected zone (HAZ), which is strictly necessary when working with high-strength steel and aluminum alloys. This high-precision approach prevents thermal distortion in thin chassis components while maintaining the structural integrity required for modern safety standards.

Aerospace engineers rely on automatic laser welding for joining complex engine components and titanium fuselage skins where weight reduction is paramount. The process supports the welding of heat-resistant superalloys, such as Inconel, without introducing the contaminants often found in traditional electrode-based methods. Deep penetration capabilities ensure hermetic seals in fuel lines and hydraulic systems where joint failure is absolutely not an option.

The marine industry adopts high-power automatic laser systems to join thick stainless steel plates used in hull construction and anti-corrosive piping systems. By utilizing continuous wave fiber lasers, shipbuilders achieve deep keyhole welds that significantly reduce fabrication time compared to multi-pass arc welding. This method creates smooth, pore-free weld beads that require minimal post-processing, thereby enhancing the long-term corrosion resistance of the vessel.

Material Compatibility and Application Data

Klear Laser remains committed to providing clean and efficient alternatives to polluting industrial joining methods. Our automated solutions optimize production lines by drastically reducing energy consumption and eliminating the need for consumable filler wires in many standard applications.

クリアレーザーを選ぶ理由

Klear Laser minimizes industrial downtime through responsive global technical support. Our certified engineers provide remote diagnostics within four hours and on-site assistance within 48 hours for critical failures. This rapid response ensures maximum machine uptime for high-volume production lines. Industrial manufacturers rely on this infrastructure to meet stringent production schedules.

We offer a comprehensive 12-month standard warranty covering all core laser components including JPT or Raycus fiber sources and wobble welding heads. Premium extended warranties up to 24 months include predictive maintenance checks and priority spare parts allocation. This coverage specifically protects against defects in materials and workmanship under normal operating conditions. Our warranty terms provide clear technical security for your laser welding investment.

Spare parts availability exceeds 95% for critical consumables and motion components through regional distribution hubs. Genuine OEM parts like scanner galvanometers and welding optics are rigorously tested for compatibility with our systems. This ensures consistent beam quality and process repeatability in automated welding cells. Quick access to authenticated components safeguards your production output and weld penetration integrity.