Io Laser: Technical Specifications

The IO Laser by Klear Laser operates at a wavelength of 1064 nm, typical for fiber pulsed lasers. This near-infrared wavelength is highly absorbed by metals and oxides, making it ideal for precision cleaning and rust removal. Unlike longer wavelengths, 1064 nm delivers energy efficiently without excessive heat diffusion, preserving substrate integrity.

Pulse energy in the IO Laser ranges from 0.1 to 120 mJ, adjustable based on application needs. High pulse energy removes stubborn contaminants like mill scale and rust, while lower settings handle delicate surface cleaning. The short pulse width (typically 10–200 ns) ensures rapid energy delivery, vaporizing contaminants before heat penetrates the base material.

Effective air or water cooling maintains stable laser performance during extended operation. Air-cooled systems are standard for portable units, offering simplicity and low maintenance. Water-cooled configurations support higher duty cycles, essential for industrial production lines requiring continuous cleaning.

Compared to sandblasting, chemical stripping, or wire brushing, the IO Laser eliminates media waste, reduces labor, and prevents substrate damage. It removes rust without warping thin metal sheets or eroding fine geometries. Laser cleaning is non-abrasive and does not alter the surface metallurgy when properly calibrated.

Below is a comparison between traditional cleaning methods and the IO Laser:

The IO Laser’s combination of optimized wavelength, controllable pulse energy, and reliable cooling enables repeatable, eco-friendly surface preparation. It integrates seamlessly into automated workflows for automotive, aerospace, and mold maintenance applications. This shift from mechanical/chemical to photonic cleaning marks a significant advancement in industrial sustainability.

主な特徴と利点

Klear Laser’s io series employs a Raycus Q-switched fiber laser source. This industrial-grade source ensures consistent energy output and longevity. It delivers precise control essential for effective rust removal without surface damage.

Adjustable pulse width ranging from 50 to 500 nanoseconds allows customization for varying rust thicknesses. This minimizes heat input to the substrate, preserving material integrity even on sensitive alloys like aluminum or thin-gauge steel.

The precision-engineered cleaning head features advanced optics for optimal beam focusing. It maintains a stable spot size during operation, enhancing cleaning efficiency and uniformity across complex surfaces.

産業用途

In the auto industry the “io” 1000 W pulsed laser cleaner is parked beside every stamping line to erase draw-iron oil and the fine mill-scale that forms on hot-rolled chassis blanks. A 200 ns MOPA pulse strips the oxide without melting the zinc coating, so the same blank can go straight to laser welding or e-coat; cycle time drops because the part is already at the right temperature. Engineers like the 2-D scan head that follows the exact edge of a B-pillar, leaving the galvanized land untouched for later spot-weld current flow.

Aerospace plants run the “io” on turbine blades after CNC machining and before fluorescent penetrant inspection. The laser’s 10–500 ns tunable pulse width removes the ceramic shell remnants from investment cast roots yet keeps the single-crystal substrate below 80 °C, so gamma-prime precipitates never coarsen. A 50 mm line optic can clean six fir-tree slots in one 30 s pass, replacing 45 min of manual glass-bead blasting and eliminating the embedded silica that used to crack under cyclic loads.

On aluminum hulls the “io” 2000 W source is gantry-mounted to chase salt-laden oxide before friction-stir welding plates up to 12 mm. A 350 ns pulse blasts the Al2O3 but stops at the pure metal, giving a bright, weld-ready surface and cutting the porosity in class-certified joints from 4 % to below 0.5 %. The same head flips to “paint” mode to ablate old antifoul down to the tie-coat, letting yards meet EU REACH standards without generating grit-water slurry that has to be trucked away.

クリアレーザーを選ぶ理由

At Klear Laser, we recognize that industrial equipment represents a critical investment in your production continuity. Our commitment to your operation extends far beyond the initial purchase to ensure your manufacturing processes remain efficient and profitable. We have engineered our support infrastructure to strictly minimize downtime and maximize the operational lifespan of your fiber laser welding and pulsed cleaning systems.

Our technical support team consists of specialized engineers who possess deep expertise in photonics and industrial automation. We provide you with direct access to troubleshooting and process optimization assistance without the need to navigate complex call center trees. Whether you require assistance calibrating pulse widths for delicate substrate cleaning or adjusting wobble frequencies for deep penetration welding, our experts guide you through the technical specifics.

We stand firmly behind the durability of our machinery with a comprehensive warranty structure designed for rigorous industrial environments. This coverage explicitly includes high-value components such as the JPT or Raycus laser sources and the digital control systems. Our warranty policy aims to protect your capital expenditure against manufacturing defects while ensuring consistent performance metrics over long operational cycles.

Maintaining a reliable supply of consumables and replacement parts is vital for uninterrupted manufacturing workflows. We maintain a robust stock of essential components, including protective windows, copper welding nozzles, and field lenses, to ensure rapid deployment when maintenance is required. Our logistics network prioritizes speed to keep your laser cleaning and welding stations fully operational with minimal delay.