When selecting large fiber laser, always prioritize the laser source brand (JPT/Raycus) over raw wattage for long-term reliability.
Large Fiber Laser: OEM & Customization
At Klear Laser we treat every 6 kW large fiber laser welder as a blank sheet. The chassis starts as a modular steel frame that we stretch, widen, or raise so the gantry clears your jigs, fixtures, and robot seventh-axis rails without forcing you to redesign the line. We then move the cable entry, add forklift pockets, and swap the standard caster set for shock-absorbing feet when the machine has to ride on an AGV.
Software is rewritten around your PLC brand. Our HMI can publish real-time seam depth, feed speed, and wobble amplitude as tags that your SCADA already understands, so the MES dashboard treats the laser like any other station. When you need traceability we embed a SQLite job log that writes weld maps, laser-on time, and fault codes to your network share every cycle, making PPAP audits one click away.
Power is not simply “6 kW on or off.” We gang two 3 kW JPT modules that can fire independently; this gives you 3 kW for thin aluminum and full 6 kW for 12 mm carbon steel without buying two machines. Each module can derate to 10 % in 1 % steps, letting you hold 0.3 kW on zinc-coated press parts to prevent blow-through while keeping beam quality low enough for a 50 µm fiber.
| 特徴 | Old GMAW / Plasma | Large Klear Fiber Laser |
|---|---|---|
| Max single-pass penetration | 5 mm (multi-run) | 12 mm stainless, 10 mm aluminum |
| Heat input | 0.8–1.2 kJ/mm | 0.25 kJ/mm at 6 kW, 1 m/min |
| Post-weld cleaning | Grinding, slag removal | None, oxide only |
| Filler wire cost | 1.2 kg wire per meter | 0.1 kg or zero autogenous |
| Energy use | 8 kWh per meter | 1.5 kWh per meter |
| Chassis customization | Fixed, 3rd party | Modular, built to fixture height |
| Software integration | None, external retrofit | Native OPC-UA, SQL logs |
| Power tuning | Stepper taps | 1 % closed-loop PWM |
The same modular philosophy applies to our pulsed large fiber cleaning heads. We slide the scanner out of the standard enclosure and bolt it to a gantry you already own, then re-clock the 200 mm lens to 300 mm so the 2 mJ pulses hit your 3 mm thick ship hull plate at 27 J/cm²—enough to remove salt-corroded paint yet keep the peak irradiance below the 0.4 GW/cm² ablation threshold that would pit the steel.
主な特徴と利点
Klear Laser defines superiority in large fiber laser systems through the rigorous integration of Tier 1 optical components and beam sources. We engineer our high-power units to withstand the demanding duty cycles required by heavy industry, aerospace, and automotive manufacturing. Our commitment to quality ensures that every machine delivers consistent energy density for critical tasks.
The core of our large fiber laser systems is the beam source, where we exclusively utilize industry-leading JPT MOPA and Raycus modules. For our pulsed cleaning machines, the JPT MOPA source allows for precise pulse width tunability to remove contaminants like rust and oil without thermal damage to the substrate. In our heavy-duty welding configurations, high-wattage Raycus sources provide the continuous wave stability necessary for deep penetration and structural integrity.
Our superiority extends to the optical delivery heads which are calibrated for specific industrial outcomes. The welding guns feature advanced wobble technology that oscillates the beam to stir the weld pool and eliminate porosity in the joint. Conversely, our cleaning heads employ high-speed galvanometer scanning to distribute high-energy pulses evenly across broad surface areas for rapid coating removal.
| Component Feature | Large Pulsed Cleaning System | High-Power CW Welding System |
|---|---|---|
| Laser Source Brand | JPT (MOPA Technology) | Raycus / IPG |
| Beam Delivery Type | Nanosecond High-Peak Pulses | Continuous Wave (CW) |
| Optical Head Tech | 2D/3D Galvanometer Scanning | Dual-Axis Wobble Head |
| Control Parameter | Adjustable Pulse Width & Frequency | Beam Width & Swing Speed |
| Primary Benefit | Non-destructive Substrate Cleaning | Deep Penetration & Gap Bridging |
We design these systems to permanently replace hazardous chemical stripping and inefficient arc welding methods. By controlling the entire optical path from the source generation to the focal point, Klear Laser guarantees a cleaner and more efficient industrial process.
産業用途
Large fiber laser welding systems are critical in automotive manufacturing for structural component assembly. High-power continuous-wave lasers (1kW-6kW) from sources like Raycus enable deep penetration welding of ultra-high-strength steels in vehicle frames. Wobble welding heads precisely control heat input to prevent distortion in thin sheets while achieving single-pass penetration up to 8mm. This replaces MIG welding, reducing post-process grinding and improving joint strength for electric vehicle battery trays.
Aerospace manufacturers deploy large pulsed fiber lasers for precision cleaning of turbine blades and structural alloys. Short pulse widths (100-300ns) remove oxidation and contaminants from titanium and Inconel substrates without thermal damage. The controlled energy delivery prevents subsurface microcracking critical for flight-critical parts. This eliminates chemical stripping methods that create hazardous waste streams during maintenance overhauls.
Marine industry applications focus on heavy-duty laser cleaning for ship hull maintenance. High-power pulsed systems (500W-2kW) efficiently remove mill scale, rust, and marine growth from carbon steel decks and ballast tanks. Precise parameter control ensures substrate temperature stays below 50°C, preventing hydrogen embrittlement in structural steel. This replaces abrasive blasting, eliminating silica dust hazards and containment costs in dry dock operations.
| 産業 | 主な用途 | Key Materials | Typical Thickness | Required Power Range |
|---|---|---|---|---|
| 自動車 | Structural Welding | UHSS (980MPa+), Aluminum Alloys | 1.2mm – 6mm | 2kW – 6kW CW |
| 航空宇宙 | Precision Cleaning | Titanium, Inconel 718, Composites | Surface Only | 500W – 1500W Pulsed |
| マリン | Rust Removal | Carbon Steel (A36), Corten | 5mm – 25mm | 1kW – 3kW Pulsed |
Marine cleaning requires careful pulse width adjustment to match rust layer thickness while preserving the steel substrate’s integrity. Aerospace welding often uses JPT MOPA lasers for adjustable pulse shaping on reflective materials like aluminum. Automotive production lines integrate robotic fiber laser cells with real-time weld monitoring for consistent joint quality in high-volume assembly.
クリアレーザーを選ぶ理由
Klear Laser’s value proposition extends far beyond the initial equipment purchase. Our comprehensive support infrastructure ensures your large fiber laser welding system maintains peak performance throughout its operational lifecycle. We provide direct factory expertise that eliminates downtime and protects your production continuity.
Our technical support team specializes in high-power fiber laser systems up to 6kW. We deliver remote diagnostics through integrated PLC monitoring and can calibrate wobble welding heads virtually. Penetration consistency checks and JPT/Raycus source parameter optimization happen in real-time. On-site field engineers arrive within 24-48 hours for critical issues, carrying advanced diagnostics equipment to troubleshoot beam delivery systems and chiller performance.
The standard warranty covers your laser source, welding head, and motion control system for 24 months. This includes unlimited technical consultations and firmware updates for wobble pattern libraries. Extended warranty packages add preventive maintenance visits where we verify penetration depth consistency and replace consumable optics before failure. All warranty work uses factory-certified procedures that maintain your system’s CE and FDA compliance.
Our spare parts distribution center stocks critical components for immediate shipment. We maintain inventory of JPT and Raycus laser modules, protective optics, and wobble head precision lenses. Emergency optics kits arrive within 24 hours in North America, preventing extended production losses. Every spare part is serialized and traceable, ensuring compatibility with your specific machine configuration and maintaining weld penetration specifications.
| サービス・コンポーネント | 応答時間 | カバレッジ | Technical Specification |
|---|---|---|---|
| Remote Support | <2時間 | Laser source & control systems | JPT/Raycus parameter optimization, wobble calibration |
| Field Service | 24-48 hours | Full system diagnostics | Penetration verification, beam quality analysis |
| 標準保証 | 24ヶ月 | Source, head, chiller | Up to 6kW power validation, optics replacement |
| Extended Warranty | 36-48 months | Preventive maintenance | Quarterly penetration testing, consumables included |
| スペアパーツ | Same day shipping | Critical optics & modules | Protective lenses, beam delivery components |
| Emergency Kits | 24-hour delivery | Optics & nozzles | Compatible with 2kW-6kW welding systems |
💰 ROI Calculator: Large Fiber Laser
