When selecting laser stripping machine for sale, always prioritize the laser source brand (JPT/Raycus) over raw wattage for long-term reliability.
Laser Stripping Machine For Sale: Shipping & Compliance
Klear Laser packs every stripping system in a vapor-barrier crate lined with 50 mm EPE foam and shock-absorbing rails; the 1C plywood base is ISPM-15 heat-treated and stamped so customs won’t delay you. A 3 kW pulsed unit sits on a laser-cut steel sub-frame that is bolted to the crate deck, while optics ride in a sealed Pelican case strapped above the gantry; total tare mass is 480 kg and forklift pockets are on all four sides for safe handling.
We ship under HS 8456.10 “Machine tools for material removal by laser,” which carries 0 % duty in the EU, 2.5 % into the US, and 7 % into India; the certificate of origin is China, but we add the correct ECCN 6A005.d classification and a 3B001 dual-use statement so your broker clears the freight in hours, not weeks. A red-encoded Class 4 placard is fixed to every crate, and the packing list shows the interlock key packed separately to keep the machine inoperable while in transit—this satisfies IATA DGR 3.3 and keeps airlines happy.
On arrival you simply cut the security bands, remove the tyvek lid, and wheel the system out on the integrated casters; no crowbars, no splinters, no rust stains on your floor. We email you the CE/UKCA file, FDA accession number, and a one-page SDS for the extraction filter so your EHS officer can sign off before the truck leaves the loading bay.
| Old Chemical Strip Line | Klear Pulsed Laser Stripper |
|---|---|
| Methylene chloride bath, 200 L every shift | No consumables, only 2 kWh electricity |
| 30 µm base metal loss, edge rounding | <3 µm removal, Ra unchanged |
| 24 h ventilation + curing time | Immediate downstream processing |
| VOC permit, haz-waste manifest | Class 4 enclosure, fume extractor only |
| $18 / m² variable cost | $0.60 / m², payback <14 months |
Our machines are compliant with IEC 60825-1:2014, carry FDA 21 CFR 1040.10 accession numbers, and the enclosure is certified IP54 with interlocked Category 4 PLe switches; if you open the door the scan head shuts down in <50 ms and the beam dump absorbs residual energy. A keyed master switch, emission warning beacon, and double-redundant interlocks satisfy OSHA 1910.147 LOTO so your insurer signs off without extra riders.
主な特徴と利点
When you investigate a Klear Laser laser stripping machine for sale, you are looking at an industrial solution engineered for non-destructive surface preparation. Our machines utilize high-energy pulsed fiber laser technology rather than continuous wave systems. This distinction is vital because pulsed lasers deliver high peak power in short bursts to vaporize rust, paint, and oxides instantly.
The superiority of our equipment begins with the laser source, where we integrate premium units from industry leaders like JPT and Raycus. Specifically, our use of MOPA (Master Oscillator Power Amplifier) architecture allows for adjustable pulse widths ranging from nanoseconds to microseconds. This flexibility enables the operator to strip delicate coatings from sensitive substrates without generating excess heat that could warp or damage the base metal.
We pair these advanced sources with high-precision 2D galvanometer cleaning heads designed for stability and ease of use. These optical heads feature field lenses that maintain a consistent focal point across the entire scanning width to ensure uniform energy distribution. The cleaning head is lightweight and sealed against dust, ensuring longevity even in harsh industrial environments where particulate matter is common.
Substrate safety is the primary advantage of choosing a Klear Laser stripping system over abrasive blasting or chemical solvents. By controlling the pulse frequency and width, our machines remove contaminants while stopping precisely at the metal interface. This capability preserves the dimensional accuracy and surface integrity of molds, aerospace parts, and automotive components.
| Technical Specification | Klear Laser Pulsed Series (JPT MOPA) | Standard CW Laser Cleaner | 従来のサンドブラスト |
|---|---|---|---|
| Laser Source Type | MOPA Pulsed Fiber Laser | Continuous Wave (CW) | N/A (Mechanical) |
| Pulse Width Control | Adjustable (2-500ns) | Fixed / Continuous | 該当なし |
| 基板の安全性 | High (Zero damage to base metal) | Low (High risk of melting/warping) | Low (Surface abrasion/pitting) |
| Heat Affected Zone (HAZ) | Negligible | Large | Low (but creates friction heat) |
| 主な用途 | Precision Mould Cleaning, Paint Stripping | Gross Rust Removal (Thick Plates) | General Rough Cleaning |
| 必要な消耗品 | None (Electricity only) | Protective Lenses only | Sand, Grit, Nozzles |
産業用途
Laser stripping machines are primarily industrial laser cleaning systems, not standalone “stripping” equipment. Klear Laser’s pulsed fiber laser cleaners effectively remove coatings, oxides, and contaminants while preserving the underlying substrate. These systems replace chemical stripping and abrasive blasting in critical industries due to their precision and environmental safety.
In automotive manufacturing and repair, our pulsed laser cleaners remove paint, rust, and sealants from chassis components, wheel rims, and engine parts. The microsecond pulse width control ensures no heat damage to thin steel or aluminum substrates during underbody rust treatment. This eliminates VOC emissions from chemical strippers required in modern assembly lines.
Aerospace and marine sectors rely on our systems for sensitive surface preparation. Aircraft maintenance crews remove corrosion from aluminum wings and titanium engine parts without compromising fatigue strength. Shipyards eliminate salt-contaminated rust from steel decks and ballast tanks, meeting strict environmental regulations where chemical runoff is prohibited. Pulse widths below 200ns prevent substrate melting on critical flight surfaces.
| 産業 | Primary Materials | Removal Target | Critical Consideration |
|---|---|---|---|
| 自動車 | Steel, Aluminum alloys | Paint, Rust, Sealants | Heat-sensitive electronics nearby |
| 航空宇宙 | Aluminum, Titanium | Corrosion, Anodizing | Fatigue-critical structural surfaces |
| マリン | Weathered Steel, Composites | Salt-scale, Rust, Marine Growth | Submerged structure compatibility |
These applications demand precise energy control to avoid substrate pitting or thermal distortion. Klear Laser systems use adjustable pulse frequencies (1-200kHz) and peak powers exceeding 20kW to safely clean conductive and non-conductive materials. The instant on/off capability ensures zero collateral damage to adjacent composite structures or wiring harnesses during selective stripping operations.
クリアレーザーを選ぶ理由
Klear Laser delivers more than industrial laser equipment. We provide a complete ownership ecosystem designed for maximum uptime and productivity. Our value proposition centers on three pillars: expert technical support, comprehensive warranty protection, and rapid spare parts fulfillment. This integrated approach ensures your laser stripping operations maintain peak performance for rust removal, paint stripping, and surface preparation applications.
Our technical support team specializes in pulsed laser cleaning applications and understands critical parameters like pulse width modulation and substrate safety thresholds. We offer 24/7 remote diagnostics, on-site training, and process optimization for your specific rust removal challenges. This direct access to laser application engineers minimizes learning curves and prevents costly parameter errors on delicate substrates.
Every Klear Laser cleaning machine includes a comprehensive warranty covering the laser source, scanning head, and critical optical components. We warranty JPT and Raycus fiber laser sources for up to 100,000 hours of operation, ensuring long-term reliability for continuous rust removal operations. Warranty terms explicitly cover output power degradation and beam quality, protecting your investment against performance drift.
We maintain a North American spare parts inventory with 95% of critical components available for same-day shipment. Replacement scanning heads, protective optics, and laser source modules are strategically stocked to minimize production interruptions. Our predictive maintenance program identifies wear items before failure, enabling proactive spare parts deployment for uninterrupted laser stripping operations.
| サービス・コンポーネント | 標準補償 | Premium Coverage |
|---|---|---|
| Technical Support Response Time | 24-hour email/phone support | 4-hour guaranteed response |
| Full Warranty Period | 2 years comprehensive | 3 years comprehensive + 2-year extended |
| Spare Parts Shipping | 3-5 business days standard | Same-day shipping from inventory |
| Initial On-Site Training | 8 hours included | 16 hours + annual refresher training |
| Remote System Diagnostics | Business hours access | 24/7 priority diagnostic access |
💰 ROI Calculator: Laser Stripping Machine For Sale
