Laser Striping Wood: Shipping & Compliance

Klear Laser ensures all equipment is crated in reinforced wooden containers with shock-absorbing foam and humidity control. This protects sensitive components during global shipping. Our custom crating complies with ISO standards for industrial transport safety.

Harmonized System (HS) code 8456.90 applies to our pulsed laser cleaning machines. This classification streamlines customs processes worldwide. Accurate HS codes prevent duty overcharges and import delays for customers.

Laser safety follows ANSI Z136.1 standards for industrial environments. Machines include interlocks, emergency stops, and certified protective enclosures. All units require operator training and safety certifications before use.

主な特徴と利点

Klear Laser’s wood-striping systems start with a 100 W MOPA pulsed fiber source that lets us dial the pulse width from 2 ns to 500 ns. A 2-ns pulse vaporizes old paint without letting heat soak into the grain, so you keep the crisp wood fiber texture that furniture and musical-instrument makers demand. Stretch the pulse to 200 ns and the same spot size removes fire-retardant char twice as fast while still staying 30 °C below the cellulose scorch point.

We pair that source with a JPT-Laser-built 2D high-speed scan head rated 7 m s⁻¹ linear speed and 4 g acceleration. The digital encoder feeds position back to the MOPA controller every 10 µs, so pulse-to-pulse overlap stays within ±2 µm even on 3-D gunstocks or crown molding. Because the head is F-theta corrected at 254 mm focal length, the striping width stays constant from center to corner, eliminating the “hour-glass” taper you see on low-cost systems.

Inside the head a proprietary 30 mm aperture keeps the beam below 0.8 mrad divergence, giving a 50 µm kerf that strips between dovetail joints without touching the sidewall. Air-knife shrouds built into the scan lens blow removed pigment downward, so the finished surface is 95 % free of redeposited ash and needs no secondary wipe-down. That same shroud pressure protects the scan mirrors from resin vapors, extending the head’s maintenance interval to 6,000 operating hours—twice the typical galvo life on competing units.

Finally, the whole package rides on Klear’s rigid cast-aluminum gantry with 0.02 mm repeatability; you can load a 4 × 8 ft oak tabletop, press “Auto Stripe,” and walk away while the machine indexes stripe after stripe with <0.1 mm gap. For millwork factories that run mixed hardwoods, that mechanical accuracy plus our real-time PID power control means no manual touch-ups and no burned edges—just clean, ready-to-finish wood.

産業用途

Laser stripping represents a significant advancement in surface preparation technology, utilizing our Pulsed Laser Cleaning Machines to remove coatings, varnish, and contaminants without mechanical abrasion. While Klear Laser equipment is frequently deployed for heavy-duty rust removal on metals, the tunable pulse width of our sources allows for the delicate treatment of organic materials like wood. This non-contact method ensures complete substrate safety by vaporizing the top layer of paint or varnish while leaving the underlying timber texture intact.

In the marine industry, laser stripping is extensively used for the restoration of teak decking and high-end wooden interiors found on yachts and cruise liners. Traditional sanding methods are subtractive and eventually thin the wood to the point of replacement, but laser cleaning selectively targets only the weather-worn sealant and grey oxidation. The operator can precisely control the energy density to clean the grooves and grain of the wood without causing thermal damage or carbonization.

The automotive sector utilizes this technology primarily in the high-end restoration of vintage vehicles that feature structural wood framing or classic wooden dashboards. Beyond wood, these same pulsed laser systems are essential for stripping paint and rust removal from steel body panels without warping the metal. The versatility of the machine allows a shop to transition from aggressive oxide removal on a chassis to gentle varnish stripping on a wooden steering wheel simply by adjusting the focal distance and laser parameters.

Aerospace applications prioritize precision above all else, and while wood is less common in modern airframes, the technology is used for stripping coatings from delicate cargo flooring and historic aircraft propellers. The critical advantage here is the elimination of chemical solvents, aligning with our mission to replace polluting industrial processes. We utilize specific pulse durations to ensure the heat affected zone is negligible, preventing any structural degradation of the base material.

Comparative Laser Stripping Parameters by Material

クリアレーザーを選ぶ理由

Klear Laser guarantees operational continuity through dedicated technical support. Our engineering team provides direct assistance for Fiber Welding, Pulsed Cleaning, and UV Printing systems in multiple languages. Rapid response times ensure minimal production downtime during critical failures. First-call resolution rates exceed 95% for common industrial application challenges.

Our comprehensive 24-month warranty covers all core laser components and motion systems. This includes JPT/Raycus pump sources, galvanometer scanners, and integrated controllers across the product line. Coverage explicitly excludes consumables and damage from improper operator handling per standard industrial agreements. Extended warranty options are available for high-utilization manufacturing environments.

Global spare parts availability is critical for sustained laser productivity. Klear maintains over 10,000 SKUs in regional distribution hubs including North America, Europe, and Asia. Genuine components like laser diodes, chiller modules, and wobble welding heads ship within 48 hours. Using certified parts preserves system calibration and prevents substrate damage during sensitive processes.