Laser Ablation Machine: Case Study

A shipbuilding facility in Shanghai struggled with rust removal on steel hulls using traditional sandblasting. The process was slow, damaged the metal surface, and generated hazardous dust requiring costly containment. Paint adhesion issues led to frequent rework and delays in project timelines.

Klear Laser’s pulsed fiber cleaning machine was deployed to address these challenges. Its precise nanosecond pulse width removed rust without altering the base metal’s integrity. The non-contact process eliminated abrasive media consumption and reduced surface preparation time significantly.

Post-installation results showed a 65% reduction in cleaning time per hull section. Operational costs dropped by 40% due to zero consumables and no waste disposal fees. Surface quality improved, extending paint lifespan by 30% and meeting strict environmental regulations.

Kluczowe cechy i zalety

Klear Laser’s laser ablation machine replaces chemical stripping and media blasting with a touch-free process that removes oxides, coatings and contaminants without touching the base metal.

The heart of the system is a JPT MOPA fiber source that delivers 1–500 ns pulse-width control in 0.1 ns steps, letting the operator dial in exact energy to lift rust while keeping the substrate below 80 °C.

A Klear-built dual-axis scanning head with F-theta flat-field lens keeps the spot size within 45 µm across a 300 mm square window, so even laser-sensitive aluminum molds never pit or re-weld.

Closed-loop encoder feedback and an integrated thermoelectric cooler hold the head within ±0.5 °C, eliminating thermal drift and guaranteeing the same cleaning depth on the first pass and the thousandth.

Because every pulse is counted and every scan vector is software-limited, the Klear ablation cell delivers micron-level cleanliness for EV battery foils, turbine blades and food-grade stainless—without grit, acids or downtime.

Zastosowania przemysłowe

Laser ablation machines utilize high-energy pulsed laser beams to vaporize surface contaminants without damaging the underlying material. At Klear Laser, our pulsed cleaning systems are engineered to replace hazardous chemical stripping and abrasive sandblasting. This technology relies on precise pulse width control to ensure that only the rust, paint, or oxide layer absorbs the energy while the substrate reflects it.

In the automotive sector, manufacturers employ laser ablation primarily for pre-weld preparation and post-weld cleaning. You will frequently see our systems removing oils, grease, and coatings from transmission gears or battery trays to ensure high-integrity bonding. This process guarantees that the metal surface is free of hydrogen-inducing contaminants, which is critical for safety-standard compliance in vehicle assembly.

The aerospace industry demands the highest level of precision and substrate safety to maintain the structural integrity of flight components. Operators use our machines to strip paint from aircraft skins or clean turbine blades without causing micro-cracks or thermal distortion. The ability to adjust the laser pulse frequency allows for the selective removal of specific layers, such as topcoats, while leaving the primer intact.

Marine applications require robust solutions to combat aggressive saltwater corrosion and heavy bio-fouling on large steel structures. Our laser cleaning units are used in dry docks to remove thick rust and old coatings from ship hulls and ballast tanks. Unlike sandblasting, this method captures vaporized residue via extraction units, preventing the release of microplastics or hazardous dust into the marine environment.

Laser Ablation Material Compatibility

Dlaczego warto wybrać Klear Laser

Klear Laser minimizes production downtime through dedicated 24/7 technical support. Our certified technicians provide remote diagnostics and rapid on-site assistance globally. This ensures your laser ablation system maintains peak performance for critical rust removal tasks without compromising substrate integrity. Immediate resolution protects your operational continuity.

We offer an industry-leading 24-month comprehensive warranty covering all core components. This includes the laser source, motion system, and critical optics essential for precise pulse width control during cleaning operations. Extended coverage options are available for high-utilization industrial environments. This commitment significantly reduces your total cost of ownership.

Spare parts availability is guaranteed with strategic global distribution hubs in the US, Germany, and China. Critical components ship within 72 hours to maintain your machine’s operational readiness. Genuine parts ensure consistent pulse energy delivery and protect sensitive substrates during ablation cycles.